Synchronising Control SYN 22

The Synchronising Control SYN 22 ensures a synchronous travelling speed of two identical 24 VDC actuators on a smoke and heat vent (SHV). It is used on large roof flaps and domelights that have to be opened and closed by two actuators due to their heavy weight. Synchronous travelling of both actuators prevents such flaps/domes from moving unevenly and from distortion. If one of the two actuators fails, the other actuator is automatically switched off at the same moment.

The Synchronising Control is supplied with power via the SHEVS control centre/control and is controlled by it. It therefore only works when a travel command is active. The SYN 22 is suitable for the actuator types G, S, SG1Bx and SG1Cx. It is available with an output current of 8 A per actuator output.

    Technical Data

    TypeSYN 22a-16
    Part number8164 2211 6000
    Line voltage supply24 VDC (-5 V / +6 V)
    Current input2 x 8 A / 24 VDC or 2 x 4 A / 48 VDC
    Output current2 x 8 A / 24 VDC or 2 x 4 A / 48 VDC
    Environmental class 1 / III (EN 12101-10 / VdS 2581)-5 °C … +75 °C
    Relative humidity20 % … 80 %, non-condensing
    Enclosure protection ratingIP43
    Dimensions in mm (W x H x D)250 x 200 x 100

    Downloads

    SYN 22 – Documentation

    Dazu passende Komponenten:

    Contact us!

    Our team will be happy to advise you or answer any questions you may have about our products.

    Distribution

    Service