Synchronising Control SYN 2

The Synchronising Control SYN 2 ensures a synchronous travelling speed of two identical 24 VDC actuators on a smoke and heat vent (SHV). It is used on large roof flaps and domelights that have to be opened and closed by two actuators due to their heavy weight. Synchronous travelling of both actuators prevents such flaps/domes from moving unevenly and from distortion. If one of the two actuators fails, the other actuator is automatically switched off at the same moment.

The Synchronising Control is supplied with power via the SHEVS control centre/control and is controlled by it. It therefore only works when a travel command is active. The SYN 2 is suitable for the actuator types G, S and SG. It is available with an output current of 4 A or 8 A per actuator output.

    Technical Data

    TypeSYN 2d-8SYN 2d-16
    Part number8164 2408 00008164 2416 0000
    Line voltage supply24 VDC (-5 V / +6 V)24 VDC (-5 V / +6 V)
    Current input8,1 A max.16,1 A max.
    Environmental class 1 / III (EN 12101-10 / VdS 2581)-5 °C … +75 °C-5 °C … +75 °C
    Relative humidity20 % … 80 %, non-condensing20 % … 80 %, non-condensing
    Enclosure protection ratingIP43IP43
    Dimensions in mm (W x H x D)150 x 200 x 80150 x 200 x 80


    SYN 2 – Documentation

    Dazu passende Komponenten:

    Contact us!

    Our team will be happy to advise you or answer any questions you may have about our products.