This External Actuator Control is used to connect 230 VAC actuators in systems with uninterruptible power supply. The EAS 1 is controlled and monitored via the 24 VDC actuator output of a SHEVS control centre/control. 24 VDC actuators must not be connected to the output at the same time.
Up to 40 individual EAS controls can be connected. The output terminals of one EAS are used for the mains supply of the following EAS controls. Operating states as well as active travel commands OPEN and CLOSE can be read from the respective indicators of the control.
| Type | EAS 1a |
| Part number | 8169 0000 0000 |
| Line voltage supply | 230 VAC / 50 – 60 Hz |
| Output current for 230VAC actuators | 6A max. |
| Environmental class 1 / III (EN 12101-10 / VdS 2581) | -5 °C … +75 °C |
| Relative humidity | 20 % … 80 %, non-condensing |
| Enclosure protection rating | IP43 |
| Dimensions in mm (W x H x D) | 158 x 118 x 76 |
Our team will be happy to advise you or answer any questions you may have about our products.
